PHP 8.4.6 Released!

    The Gmagick class

    (PECL gmagick >= Unknown)

    Introduction

    Class synopsis

    class Gmagick {
    /* Methods */
    public __construct(string $filename = ?)
    public addimage(Gmagick $source): Gmagick
    public addnoiseimage(int $noise_type): Gmagick
    public annotateimage(
        GmagickDraw $GmagickDraw,
        float $x,
        float $y,
        float $angle,
        string $text
    ): Gmagick
    public blurimage(float $radius, float $sigma, int $channel = ?): Gmagick
    public borderimage(GmagickPixel $color, int $width, int $height): Gmagick
    public charcoalimage(float $radius, float $sigma): Gmagick
    public chopimage(
        int $width,
        int $height,
        int $x,
        int $y
    ): Gmagick
    public clear(): Gmagick
    public commentimage(string $comment): Gmagick
    public compositeimage(
        Gmagick $source,
        int $COMPOSE,
        int $x,
        int $y
    ): Gmagick
    public cropimage(
         int $width ,
         int $height ,
        int $x,
        int $y
    ): Gmagick
    public cropthumbnailimage(int $width, int $height): Gmagick
    public current(): Gmagick
    public cyclecolormapimage(int $displace): Gmagick
    public deconstructimages(): Gmagick
    public despeckleimage(): Gmagick
    public destroy(): bool
    public drawimage(GmagickDraw $GmagickDraw): Gmagick
    public edgeimage(float $radius): Gmagick
    public embossimage(float $radius, float $sigma): Gmagick
    public enhanceimage(): Gmagick
    public equalizeimage(): Gmagick
    public flipimage(): Gmagick
    public flopimage(): Gmagick
    public frameimage(
        GmagickPixel $color,
        int $width,
        int $height,
        int $inner_bevel,
        int $outer_bevel
    ): Gmagick
    public gammaimage(float $gamma): Gmagick
    public getcopyright(): string
    public getfilename(): string
    public getimagebackgroundcolor(): GmagickPixel
    public getimageblueprimary(): array
    public getimagebordercolor(): GmagickPixel
    public getimagechanneldepth(int $channel_type): int
    public getimagecolors(): int
    public getimagecolorspace(): int
    public getimagecompose(): int
    public getimagedelay(): int
    public getimagedepth(): int
    public getimagedispose(): int
    public getimageextrema(): array
    public getimagefilename(): string
    public getimageformat(): string
    public getimagegamma(): float
    public getimagegreenprimary(): array
    public getimageheight(): int
    public getimagehistogram(): array
    public getimageindex(): int
    public getimageinterlacescheme(): int
    public getimageiterations(): int
    public getimagematte(): int
    public getimagemattecolor(): GmagickPixel
    public getimageprofile(string $name): string
    public getimageredprimary(): array
    public getimagerenderingintent(): int
    public getimageresolution(): array
    public getimagescene(): int
    public getimagesignature(): string
    public getimagetype(): int
    public getimageunits(): int
    public getimagewhitepoint(): array
    public getimagewidth(): int
    public getpackagename(): string
    public getquantumdepth(): array
    public getreleasedate(): string
    public getsamplingfactors(): array
    public getsize(): array
    public getversion(): array
    public hasnextimage(): mixed
    public haspreviousimage(): mixed
    public implodeimage(float $radius): mixed
    public labelimage(string $label): mixed
    public levelimage(
        float $blackPoint,
        float $gamma,
        float $whitePoint,
        int $channel = Gmagick::CHANNEL_DEFAULT
    ): mixed
    public magnifyimage(): mixed
    public mapimage(gmagick $gmagick, bool $dither): Gmagick
    public medianfilterimage(float $radius): void
    public minifyimage(): Gmagick
    public modulateimage(float $brightness, float $saturation, float $hue): Gmagick
    public motionblurimage(float $radius, float $sigma, float $angle): Gmagick
    public newimage(
        int $width,
        int $height,
        string $background,
        string $format = ?
    ): Gmagick
    public nextimage(): bool
    public normalizeimage(int $channel = ?): Gmagick
    public oilpaintimage( float $radius ): Gmagick
    public previousimage(): bool
    public profileimage(string $name, string $profile): Gmagick
    public quantizeimage(
        int $numColors,
        int $colorspace,
        int $treeDepth,
        bool $dither,
        bool $measureError
    ): Gmagick
    public quantizeimages(
        int $numColors,
        int $colorspace,
        int $treeDepth,
        bool $dither,
        bool $measureError
    ): Gmagick
    public queryfontmetrics(GmagickDraw $draw, string $text): array
    public queryfonts(string $pattern = "*"): array
    public queryformats(string $pattern = "*"): array
    public radialblurimage(float $angle, int $channel = Gmagick::CHANNEL_DEFAULT): Gmagick
    public raiseimage(
        int $width,
        int $height,
        int $x,
        int $y,
        bool $raise
    ): Gmagick
    public read(string $filename): Gmagick
    public readimage(string $filename): Gmagick
    public readimageblob(string $imageContents, string $filename = ?): Gmagick
    public readimagefile(resource $fp, string $filename = ?): Gmagick
    public reducenoiseimage(float $radius): Gmagick
    public removeimage(): Gmagick
    public removeimageprofile(string $name): string
    public resampleimage(
        float $xResolution,
        float $yResolution,
        int $filter,
        float $blur
    ): Gmagick
    public resizeimage(
        int $width,
        int $height,
        int $filter,
        float $blur,
        bool $fit = false
    ): Gmagick
    public rollimage(int $x, int $y): Gmagick
    public rotateimage(mixed $color, float $degrees): Gmagick
    public scaleimage(int $width, int $height, bool $fit = false): Gmagick
    public separateimagechannel(int $channel): Gmagick
    setCompressionQuality( int $quality ): Gmagick
    public setfilename(string $filename): Gmagick
    public setimagebackgroundcolor(GmagickPixel $color): Gmagick
    public setimageblueprimary(float $x, float $y): Gmagick
    public setimagebordercolor(GmagickPixel $color): Gmagick
    public setimagechanneldepth(int $channel, int $depth): Gmagick
    public setimagecolorspace(int $colorspace): Gmagick
    public setimagecompose(int $composite): Gmagick
    public setimagedelay(int $delay): Gmagick
    public setimagedepth(int $depth): Gmagick
    public setimagedispose(int $disposeType): Gmagick
    public setimagefilename(string $filename): Gmagick
    public setimageformat(string $imageFormat): Gmagick
    public setimagegamma(float $gamma): Gmagick
    public setimagegreenprimary(float $x, float $y): Gmagick
    public setimageindex(int $index): Gmagick
    public setimageinterlacescheme(int $interlace): Gmagick
    public setimageiterations(int $iterations): Gmagick
    public setimageprofile(string $name, string $profile): Gmagick
    public setimageredprimary(float $x, float $y): Gmagick
    public setimagerenderingintent(int $rendering_intent): Gmagick
    public setimageresolution(float $xResolution, float $yResolution): Gmagick
    public setimagescene(int $scene): Gmagick
    public setimagetype(int $imgType): Gmagick
    public setimageunits(int $resolution): Gmagick
    public setimagewhitepoint(float $x, float $y): Gmagick
    public setsamplingfactors(array $factors): Gmagick
    public setsize(int $columns, int $rows): Gmagick
    public shearimage(mixed $color, float $xShear, float $yShear): Gmagick
    public solarizeimage(int $threshold): Gmagick
    public spreadimage(float $radius): Gmagick
    public stripimage(): Gmagick
    public swirlimage(float $degrees): Gmagick
    public thumbnailimage(int $width, int $height, bool $fit = false): Gmagick
    public trimimage(float $fuzz): Gmagick
    public writeimage(string $filename, bool $all_frames = false): Gmagick
    }

    Table of Contents

    Found A Problem?

    Learn How To Improve This Page • Submit a Pull Request • Report a Bug

    User Contributed Notes

    robert at cesaric dot com
    13 years ago
    getNumberImages() isn't documented here but it is available. You can look at ImageMagick documentation for use.
    To Top