Set-Vpn Server Configuration

Reference

Module:: RemoteAccess

Updates S2S server parameters.

Syntax

Set-VpnServerConfiguration
   [-TunnelType <TunnelType>]
   [-SstpPorts <UInt32>]
   [-GrePorts <UInt32>]
   [-IdleDisconnectSeconds <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-MMSALifeTimeSeconds <UInt32>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-Ikev2Ports <UInt32>]
   [-L2tpPorts <UInt32>]
   [-PassThru]
   [-EncryptionType <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-VpnServerConfiguration
   [-TunnelType <TunnelType>]
   [-PassThru]
   [-RevertToDefault]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Set-VpnServerConfiguration
   [-TunnelType <TunnelType>]
   [-SstpPorts <UInt32>]
   [-GrePorts <UInt32>]
   [-IdleDisconnectSeconds <UInt32>]
   [-SALifeTimeSeconds <UInt32>]
   [-MMSALifeTimeSeconds <UInt32>]
   [-SADataSizeForRenegotiationKilobytes <UInt32>]
   [-Ikev2Ports <UInt32>]
   [-L2tpPorts <UInt32>]
   [-PassThru]
   [-CustomPolicy]
   [-EncryptionMethod <EncryptionMethod>]
   [-IntegrityCheckMethod <IntegrityCheckMethod>]
   [-CipherTransformConstants <CipherTransformConstants>]
   [-PfsGroup <PfsGroup>]
   [-AuthenticationTransformConstants <AuthenticationTransformConstants>]
   [-DHGroup <DHGroup>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-VpnServerConfiguration cmdlet updates IPSEC properties on RRAS server for incoming S2S VPN Interfaces. By Specifying CustomPolicy, IPsec parameters can be customized.

Examples

Example 1: Change the idle disconnect time

PS C:\>Set-VpnServerConfiguration -IdleDisconnectSeconds 1000 -PassThru

This command changes the idle disconnect time of the VPN server to 1000 seconds. The command includes the PassThru parameter, so it sends a VpnServerIPsecConfiguration object to the console.

Example 2: Configure a custom IPsec policy

PS C:\>Set-VpnServerConfiguration -CustomPolicy -EncryptionMethod "AES128" -DhGroup "Group2" -PfsGroup "PFS2" -CipherTransformConstants "AES128"  -IntegrityCheckMethod "SHA256" -AuthenticationTransformConstants "SHA256128" -PassThru

This command configures a custom IPsec policy for incoming VPN connections and S2S protocol VPN connections that do not use a pre-shared key as an authentication method.

Parameters

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-AuthenticationTransformConstants

Specifies the authentication transform plumbed in Ipsec policy.

Type:	AuthenticationTransformConstants
Aliases:	FirstTransformType
Accepted values:	MD596, SHA196, SHA256128, GCMAES128, GCMAES192, GCMAES256, None
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:	CimSession [ ]
Aliases:	Session
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-CipherTransformConstants

Specifies the cipher plumbed in IPsec policy.

Type:	CipherTransformConstants
Aliases:	FirstCipherAlgorithm, OtherCipherAlgorithm
Accepted values:	DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES192, GCMAES256, None
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CustomPolicy

Indicates the custom IKE IPSEC policy.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-DHGroup

Specifies the DH Group Plumbed in Ipsec policy.

Type:	DHGroup
Accepted values:	None, Group1, Group2, Group14, ECP256, ECP384, Group24
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-EncryptionMethod

Specifies the encryption method plumbed in IKE policy.

Type:	EncryptionMethod
Aliases:	Encryption
Accepted values:	DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES256
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-EncryptionType

Specifies the type of Encryption.

Type:	String
Accepted values:	NoEncryption, RequireEncryption, OptionalEncryption, MaximumEncryption
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-GrePorts

Specifies the number of Generic Routing Encapsulation (GRE) ports.

Type:	UInt32
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-IdleDisconnectSeconds

Specifies the time, in seconds, after which an idle connection is terminated. Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.

Type:	UInt32
Aliases:	IdleDurationSeconds
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-Ikev2Ports

Specifies the number of IKEv2 ports that are created.

Type:	UInt32
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-IntegrityCheckMethod

Specifies the integrity method plumbed in IPsec policy.

Type:	IntegrityCheckMethod
Aliases:	FirstIntegrityAlgorithm, OtherHashAlgorithm
Accepted values:	MD5, SHA1, SHA256, SHA384
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-L2tpPorts

Specifies the number of L2TP ports that are created.

Type:	UInt32
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-MMSALifeTimeSeconds

Specifies the lifetime of a Main Mode security association (SA) in seconds, after which the SA is no longer valid.

Type:	UInt32
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-PfsGroup

Specifies the PFS Group plumbed in Ipsec policy.

Type:	PfsGroup
Aliases:	PfsGroupId
Accepted values:	None, PFS1, PFS2, PFS2048, ECP256, ECP384, PFSMM, PFS24
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-RevertToDefault

Indicates that the IPsec parameters revert to a default value

Type:	SwitchParameter
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-SADataSizeForRenegotiationKilobytes

Specifies the number of kilobytes that are allowed to transfer using a security association (SA), after which the SA will be renegotiated.

Type:	UInt32
Aliases:	LifeTimeKiloBytes
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-SALifeTimeSeconds

Specifies the lifetime of a SA in seconds, after which the SA is no longer valid.

Type:	UInt32
Aliases:	LifeTimeSeconds, QMSALifeTimeSeconds
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-SstpPorts

Specifies the number of SSTP ports.

Type:	UInt32
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-ThrottleLimit

Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.

Type:	Int32
Position:	Named
Default value:	None
Accept pipeline input:	False
Accept wildcard characters:	False

-TunnelType

Specifies the Tunnel Type to which Custom Policy is to be applied

Type:	TunnelType
Accepted values:	IKEV2, L2TP
Position:	Named
Default value:	None
Accept pipeline input:	True
Accept wildcard characters:	False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	False
Accept pipeline input:	False
Accept wildcard characters:	False

Inputs

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.TunnelType

UInt32

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.EncryptionMethod

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.IntegrityCheckMethod

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.CipherTransformConstants

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.PfsGroup

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.AuthenticationTransformConstants

Microsoft.PowerShell.Cmdletization.GeneratedTypes.VpnServerIPsecConfiguration.DHGroup

String

Outputs

CimInstance

Get-VpnServerConfiguration